How to split TXT files in batches? Split multiple Notepad files into smaller files by line count or file quantity


Translation:EnglishFrançaisDeutschEspañol日本語한국어,Update Time:2026-11-15 06:25:16
Content note: This article reflects the software version available when it was published. Interfaces and features may change with updates; please refer to the current software. If you find an error, please let us know.
Software featured in this articleHeSoft Doc Batch Tool
Free DownloadSoftware IntroductionUser Guide

When the content of multiple TXT Notepad files is too long and needs to be imported into the system separately, distributed to different personnel, or archived at a fixed scale, copying and pasting one by one is not only time-consuming but also prone to omitting content. This article introduces how to use the text file splitting feature in office software to import multiple txt files at once, and perform batch processing based on the maximum number of lines per file, the average split quantity, or a custom range. After processing is complete, each source file can generate an independent result folder and multiple small TXT files, suitable for scenarios such as data organization, log splitting, corpus processing, and batch archiving.

Facing dozens or even hundreds of long TXT Notepad files, if you need to split each file into several smaller files, manually opening Notepad, selecting content, copying and pasting, and saving one by one will create a large amount of repetitive work. The more files there are, the more likely problems such as missing one line when copying, messy save names, duplicated content, or skipping a file will occur.

This article solves the problem of "how to batch split many TXT files into multiple smaller files." By using desktop software for batch processing of office files such as HeSoft Doc Batch Tool , you can add multiple .txt text files at once, and then split them according to the number of lines per file, the target number of files, or a custom range. The software will process the files in the imported list one by one, without requiring users to open Notepad for each file, thereby reducing mechanical copying, pasting, and Save As operations.

The following will explain the file changes before and after processing and the complete operating approach based on the actual interface. In the example, 5 TXT files are imported at once, and each text file is split evenly into 5 smaller files. In actual use, you can adjust the splitting method and quantity according to the file content and business requirements.

1. Applicable scenarios: which TXT files are suitable for batch splitting

TXT is a common plain text format, usually with the .txt extension, and can be opened through Windows Notepad and other text editors. Because of its simple format, it is often used to save logs, lists, corpora, collection results, program-exported data, and batch task lists. When a single text file is too large, or when content in the same file needs to be transferred in batches, TXT file splitting becomes necessary.

1. Segmenting large log files

Server logs, software runtime logs, or device records may contain tens of thousands of lines. Some platforms have limits on the size or number of lines of a single uploaded file. In that case, you can first split a large TXT into multiple smaller TXT files by line count, and then upload, check, or assign them to different personnel for analysis in batches.

2. Distributing lists, accounts, or task lists in batches

A Notepad file may contain a large number of names, numbers, URLs, or pending tasks. If tasks need to be distributed evenly among several personnel, you can split them evenly according to the target number of files, obtaining multiple relatively balanced text files and reducing manual calculation and segmented copying.

3. Organizing text corpora and datasets

In tasks such as corpus cleaning, content review, and data annotation, original TXT files are often numerous. Batch splitting can allow each source file to generate smaller files according to unified rules, making it easier to import them into other systems, sample-check them, or process them in batches.

4. System imports limited by line count or file size

Some business systems cannot accept text files with too much content at one time. In this case, you can choose "maximum number of lines per text file" so that the line count of the split files can more easily meet import requirements. Note that the software interface reflects splitting by line count, by quantity, or by range; if the business system limits bytes or file size instead, you should also check after processing whether the generated files meet the specific limits of the target platform.

2. Result preview: what changes before and after splitting

Before processing: multiple independent TXT Notepad files

Before processing, the folder contains multiple text files such as big_bang.txt, black_holes.txt, dark_energy.txt, dark_matter.txt, and galaxies.txt. They are all source files that need to follow the same splitting rule. If a manual method is used, you would need to open these 5 files separately and repeatedly intercept and save content; as the number of files continues to increase, the required time will also grow significantly.

image-Batch split TXT files,TXT file splitting,batch split Notepad files,split text files by line,split text files by quantity

Before batch processing, it is recommended to first confirm that the files to be split are all correct TXT text files, and briefly spot-check whether the content can be opened normally. For important materials, you can keep a backup of the original files to avoid accidentally deleting source data when organizing the results later.

After processing: each source file corresponds to a result folder

The example selects "split evenly into several files" and sets the quantity to 5. After processing is complete, you can see folders named after the original file base names, such as big_bang, black_holes, dark_energy, dark_matter, and galaxies. Opening one of the result folders shows split results such as 1.txt, 2.txt, 3.txt, 4.txt, and 5.txt.

image-Batch split TXT files,TXT file splitting,batch split Notepad files,split text files by line,split text files by quantity

This result structure has two obvious benefits: first, the split content from different source files is stored separately, avoiding multiple 1.txt, 2.txt files with the same name overwriting each other; second, the source file name and result folder name maintain a corresponding relationship, making it more intuitive to find a certain group of split results later. The example shows each source file split into 5 parts, but the actual number generated should be determined by the selected rules, input parameters, and source file content.

3. Operating steps: batch split multiple TXT files into smaller files

Step 1: Enter the "Split text file into multiple files" function

After opening HeSoft Doc Batch Tool , select "Text Tools" from the function categories on the left. After entering the Text Tools page, switch to the "Merge & Split" category, then find and click "Split text file into multiple files." The function description in the interface says it batch splits text files into multiple files by line count or number of files, which corresponds to this requirement.

image-Batch split TXT files,TXT file splitting,batch split Notepad files,split text files by line,split text files by quantity

The purpose of this step is to enter the correct batch processing module. Be careful not to mistakenly select "Merge text files into one file" or other merging functions, because merging and splitting work in opposite directions. After entering the function, the top of the page will display "Split text file into multiple files" and provide a flow for selecting records, setting processing options, setting the save location, and starting processing.

Step 2: Add all TXT files to be processed at once

On the "Select records to process" page, you can click "Add files" to select one or more TXT files; if the files to be processed are stored together in the same directory, you can also use "Import files from folder." After importing, the files will appear in the list, and the interface will display information such as name, path, extension, creation time, and modification time.

image-Batch split TXT files,TXT file splitting,batch split Notepad files,split text files by line,split text files by quantity

In the example, big_bang.txt, black_holes.txt, dark_energy.txt, dark_matter.txt, and galaxies.txt have already been added, and the bottom summary shows the record count is 5. At this point, you should focus on checking three things: first, whether the number of files matches expectations; second, whether the extension is txt; third, whether the path points to the correct source file location.

If a file that does not need to be processed is mixed into the list, you can remove it from the task list through the delete action on the right side of the corresponding record; if you need to reselect, you can also use "Clear" at the top of the page. After confirming the list is correct, click "Next" at the bottom to enter the splitting rule settings page. Batch importing is the key to improving efficiency in the whole process, because the same rules need to be set only once and can then be applied to multiple text files in the list.

Step 3: Select the TXT splitting method according to your needs

On the "Set processing options" page, you can see three splitting methods: maximum lines per text file, split evenly into several files, and custom range splitting. You should choose the appropriate method according to subsequent usage requirements, rather than only pursuing as many generated files as possible.

image-Batch split TXT files,TXT file splitting,batch split Notepad files,split text files by line,split text files by quantity

In this example, select "Split evenly into several files" and enter 5 in the corresponding input box. This means each imported source TXT will be split into 5 smaller files according to the even distribution approach. After completing the settings, click "Next" to continue.

Splitting by maximum number of lines per file

If the downstream system clearly stipulates that each text file cannot exceed a certain number of lines, or if you want each result file to maintain a fixed maximum record volume, you can choose "maximum lines per text file." For example, if business requirements state that each file must not exceed 1000 lines, you should set the parameters around this limit. Because the remaining content at the end may be fewer than the set number of lines, the last result file may usually have fewer lines than the previous files. That is a normal phenomenon when splitting by an upper limit.

Splitting evenly into a specified number of files

If the goal is to divide each source file into a fixed number of parts, for example to hand them to 5 personnel, it is more convenient to choose "Split evenly into several files." In the example, 5 is entered, so each source file will form a group of numbered text files. If the total number of lines in a source file cannot be divided evenly by the target quantity, there may be slight differences in content volume among result files, and you should not judge processing as failed simply because the file sizes are not completely identical.

Splitting by custom range

When you need to extract a specified interval, or when business rules are not simply a fixed line count or an average number of parts, you can choose "Custom range splitting." Before using this method, you should first clarify the content range to be retained and carefully check the boundaries to prevent omissions or duplication caused by incorrect range connections. The specific range format that can be filled in should follow the prompts and input requirements on the current page of the software.

Step 4: Set the save location for the split results

After completing the processing options, the flow proceeds to "Set save location." The purpose of this stage is to determine where the generated small TXT files will be stored. For easier checking, it is recommended to choose a directory that is easy to find and has sufficient space, and try not to mix the output results with a large number of unrelated files.

If you need to keep the source files, the output directory should preferably be different from the directory where the original TXT files are located. You can create a folder with a task name or date in advance, such as "TXT split results", so that after processing is complete you can quickly identify the results and also conveniently copy, compress, or deliver them as a whole. After setting, continue to the next stage.

Step 5: Start batch processing and check the results

When you reach the "Start processing" stage, confirm the file list, splitting method, parameters, and save location again, and then start the task. The software will process the multiple imported TXT files in sequence according to the same rules. Compared with manually opening Notepad one by one and splitting files by hand, this method reduces repeated clicking, repeated content copying, and multiple Save As operations.

After processing is complete, open the configured save directory and check whether result folders corresponding to each source file have appeared, and then open one or two of the folders to spot-check the numbered TXT files. It is recommended to check the first file, the last file, and two adjacent files at the same time to confirm whether the text order meets expectations, whether the connection positions are normal, and whether the generated quantity matches the settings.

4. How to choose the appropriate TXT splitting rule

The three splitting methods target different goals. Before choosing a rule, first clarify whether you care more about "maximum lines per part", "how many parts must be obtained in the end", or "only a specified range is needed".

  • With a clear line count upper limit: choose "maximum lines per text file", suitable for system imports, batch reading, and controlling the number of records per part.
  • With a clear requirement for the number of parts: choose "split evenly into several files", suitable for task distribution, fixed-batch organization, and multi-person collaboration.
  • With a specified content interval: choose "custom range splitting", suitable for processing only specific sections or outputting according to predetermined intervals.

Taking the example in this article, all 5 source TXT files need to produce 5 result parts respectively, so using the even splitting method is the most direct. If it is changed to "maximum 1000 lines per file", different source files may ultimately produce different numbers of small files because their total line counts differ.

5. Common problems and precautions

1. Why are the split file sizes not completely the same?

When text is split by line, each line may contain a different number of characters. Even if two result files have similar line counts, their disk space usage may still differ. During even splitting, if the total number of lines in a source file cannot be divided evenly by the target number of parts, the line counts of the files may also differ slightly. When checking the results, you should judge by content and line count rather than only comparing file sizes.

2. Will batch processing mix the contents of multiple source files together?

From the result example, you can see that each source TXT corresponds to a folder named after the original file base name, and the split smaller files are saved in their respective directories. This organizational method helps distinguish different sources. However, after processing is complete, it is still recommended to spot-check whether the folder names correspond one-to-one with the source files, especially when there are many files or when file names are similar.

3. Why are the result files named 1.txt, 2.txt, and 3.txt?

The numbered names indicate the order of the split results from the same source file. Because results from different source files are located in different folders, identical numbers usually do not cause confusion. If you later need to change them to names with business meaning, you can first confirm that the content is correct and then organize them according to your own archiving standards.

4. When setting the split quantity, is more always better?

No. Too many split parts will produce a large number of scattered files, which actually increases the cost of searching, transferring, and archiving. You should set it according to actual needs such as upload limits, number of personnel, and task volume per batch. If the source file content is relatively small but you require it to be split into many parts, you may also get result files with very little content, so you should roughly understand the source text scale before processing.

5. Do I need to back up the original TXT files before operating?

For work materials, customer data, log evidence, or the only version of a text file, it is recommended to keep a backup of the original files and save the results to a separate directory. Batch file operations are efficient, but they also involve many files. Clearly distinguishing source files from output files can reduce the risk of accidental deletion, overwriting, and incorrect delivery.

6. How to verify splitting integrity when the TXT content is large?

You can first test the rules with a small sample and then expand to all files. After formal processing, spot-check the first and last parts, and check the connection positions between adjacent files. If each line of text represents an independent record, you can also compare the total record volume before and after splitting. For data tasks with strict requirements, you should not stop just because folders have been generated; you should complete the necessary integrity verification.

6. Summary

The core value of batch splitting TXT files is not just turning one large Notepad file into several smaller files, but allowing multiple text files to be processed at once according to unified rules. Using HeSoft Doc Batch Tool , you can enter "Split text file into multiple files" from "Text Tools - Merge & Split", batch add TXT records, then choose splitting by maximum line count, average number of files, or custom range, and finally set the save location and execute processing.

Compared with manual copying and pasting, this kind of batch processing method in office software can reduce repetitive labor, keep the results from different source files in a relatively unified directory structure, and is also more suitable for tasks such as log segmentation, list distribution, corpus organization, and system import. In actual operation, it is recommended to first test parameters with one or two files, confirm the splitting effect, and then import all TXT files; after processing is finished, promptly spot-check the content and quantity. Now you can organize the .txt files that need to be split, create a batch task according to the steps in this article, and complete the text splitting work that originally required repeated operations in a centralized way.


Keyword:Batch split TXT files , TXT file splitting , batch split Notepad files , split text files by line , split text files by quantity
Creation Time:2026-11-15 06:25:00
Software featured in this articleHeSoft Doc Batch Tool
Free DownloadSoftware IntroductionUser Guide
Content note: This article reflects the software version available when it was published. Interfaces and features may change with updates; please refer to the current software. If you find an error, please let us know.