How to batch accept or reject revisions in multiple Word documents? Tutorial on one-click processing of review marks for doc and docx
Translation:EnglishFrançaisDeutschEspañol日本語한êµì–´ï¼ŒUpdate Time:2026-11-17 06:23:18
After multiple Word documents have been reviewed by several people, they often contain numerous insertions, deletions, and formatting changes. If you open the doc and docx files one by one and manually accept or reject the revisions, it is not only time-consuming but also easy to miss some. This article explains how to use HeSoft Doc Batch Tool to import multiple Word files at once, uniformly choose to accept all revisions or reject all revisions, and stop further revisions as needed. Through a standardized batch processing workflow, you can quickly obtain Word documents with clean content and a consistent revision status, suitable for finalizing contracts, organizing papers, archiving materials, and batch delivery scenarios.
During contract review, thesis revision, policy document updates, bid preparation, or team collaboration, Word documents often have "Track Changes" enabled. After different people add or delete content, the document may show red text, strikethroughs, underlines, and revision marks in the page margin. A small number of files can be opened and processed one by one, but if a folder contains dozens or even hundreds of doc and docx documents, repeatedly going into Word's "Review" tab and then clicking accept or reject all revisions creates a large amount of repetitive work.
The problem this article aims to solve is batch-changing the revision status of many Word files to either accepted or rejected in a unified way. Using an office software designed for batch file processing such as HeSoft Doc Batch Tool , you can import multiple Word documents at once, set a unified revision handling method, and then run the task centrally. This reduces the mechanical work of opening files one by one and also helps ensure that a batch of documents follows the same processing standard.
1. When is it appropriate to batch accept or reject Word revisions
Accepting revisions and rejecting revisions represent two different finalization approaches. Before starting batch processing, you should determine the expected final result based on business requirements.
1. Centralized finalization of contracts, policies, and project documents
After multiple people review contracts or internal policies, there may be several Word files with tracked changes. If all changes have been confirmed, you can batch select "Accept All Revisions" to formally write the changes into the documents and remove insertions, deletions, and other review states, making subsequent printing, archiving, or sending easier.
2. Batch rejecting unwanted changes
If changes added by reviewers should not be kept, you can apply "Reject All Revisions" to multiple documents at once. Usually, rejecting revisions undoes the revised content: text marked as newly added will be removed, and original text marked for deletion will be restored. Therefore, before choosing to reject, you should confirm that these changes really do not need to be kept.
3. Cleaning up review marks before submitting theses, reports, and bids
Before submission, theses, research reports, bid documents, and client deliverables usually should not continue to show red revision lines and deleted content. By batch accepting revisions, you can quickly bring multiple Word documents into a state more suitable for reading and delivery, avoiding the risk of exposing internal revision history because one file was missed.
4. Batch unifying the revision state of doc and docx files
Historical materials may contain both older .doc files and newer .docx files. The pending directory shown in the screenshot includes both extensions. Adding them all to a batch task at once avoids opening and processing them separately by format and improves document organization efficiency.
2. Preview of results: what changes before and after processing
1. Before processing: many files, with obvious revision marks retained in the documents
Before processing, the folder contains multiple Word files such as 1.doc, 2.docx, 3.docx, and 4.docx. With this kind of batch of documents, if you use the usual method, you need to open, process, save, and close each one individually. The more files there are, the more obvious the repetitive work becomes.

After opening one of the documents, you can see red strikethrough text, red newly added text, and revision indicator lines on the left side of the page in the body content. These are not ordinary font colors or strikethrough formatting, but revision records generated during Word review. Simply switching to "No Markup" may only hide the display and does not necessarily mean the revisions have actually been accepted or rejected.

2. After processing: revision results are applied to the body text
The example uses "Accept All Revisions." After processing is complete, sentences previously marked for deletion are no longer retained, newly added paragraphs appear as ordinary body text, and the red revision color, strikethrough lines, and margin revision indicators disappear. The document content becomes cleaner and more suitable for reading, printing, and external delivery.

It should be especially noted that the screenshot shows the result after accepting revisions. If you select "Reject All Revisions" in the processing options, the final content will be restored according to the rejection logic, rather than producing exactly the same text as the example. Therefore, before batch execution, you should clarify whether the version to keep is the revised version or the pre-revision version.
3. Steps for using HeSoft Doc Batch Tool
HeSoft Doc Batch Tool is a software tool for centrally processing office files. Its value is not to replace everyday editing in Word, but to turn operations that would otherwise need to be repeated for every file into a single process of importing, setting unified options, and running in batch. The following explains the specific workflow in the order shown in the interface screenshots.
Step 1: Open the "Accept or Reject Word Revisions" feature
After starting the software, select "Word Tools" in the left navigation bar. At the top of the main interface, you can see categories such as "All," "Content Processing," "Merge and Split," "Page Processing," "Security Protection," "Headers and Footers," "Optimization and Repair," and "Format Conversion." This task belongs to document content processing, so find and click "Accept or Reject Word Revisions" under the "Content Processing" category.

The purpose of entering this feature is to create a batch task specifically for uniformly processing Word revision records. Do not choose other features such as "Remove All Formatting in Word" or "Delete Comments in Word," because formatting, comments, and revisions are different types of document information, and deleting comments cannot replace accepting or rejecting revisions.
Step 2: Batch add the doc and docx files to be processed
After entering the feature page, the workflow first stays at "Select Records to Process." The interface provides two import options: "Add Files" and "Import Files from Folder."
- When the number of documents to process is small, or the files are scattered across different directories, you can use "Add Files."
- When a large number of documents to be processed are stored in the same directory, you can choose "Import Files from Folder" to reduce repeated file selection operations.
After the files are added, the list displays information such as sequence number, name, path, extension, creation time, and modification time. In the screenshot, 1 doc file and 3 docx files have been added, and the total record count at the bottom is 4.

Before clicking "Next," it is recommended to check the file names and paths to confirm that no wrong files are in the list. If a file does not need to participate in this task, you can remove it from the list using the delete icon on the right side of its row; if the entire list is wrong, you can also use "Clear" at the top of the page to add files again.
The expected result of this step is that all Word documents requiring unified revision processing appear in the task list, and the number of files matches the actual requirement. After confirming, click "Next" at the bottom of the page.
Step 3: Choose Accept All Revisions or Reject All Revisions
After entering "Set Processing Options," the "Operation Type" in the interface provides two choices:
- Accept All Revisions: Keep the final result after revisions. For example, newly added content becomes ordinary body text, and deleted content is formally removed from the document.
- Reject All Revisions: Undo the revisions in the document. For example, content added during revision will be discarded, and deleted original content will usually be restored.

The current selection in the screenshot is "Accept All Revisions," which is consistent with the post-processing result shown earlier. In actual operation, do not simply continue with the default option; make the choice based on the purpose of the files. For materials that have already passed review and are ready for finalization, generally choose Accept All Revisions; for files whose changes need to be rolled back to restore the pre-revision content, choose Reject All Revisions.
Step 4: Set "Stop Tracking" as needed
Below the operation type, there is also a "Stop Tracking" toggle. It is not the same concept as accepting or rejecting existing revisions:
- Accepting or rejecting processes revision records that already exist in the document.
- Stopping tracking controls whether the processed document remains in track changes mode afterward.
If the document is already finalized and you want subsequent text input to no longer automatically generate new review marks, you can enable "Stop Tracking." If, after processing existing revisions, the file still needs to go through another round of multi-person review, you should decide whether to turn off track changes based on the actual workflow.
The expected result of this step is that every imported Word file uses the same set of processing rules, such as "Accept All Revisions and Stop Tracking," or "Reject All Revisions while retaining the subsequent review arrangement." After confirming the options, click "Next."
Step 5: Set the save location and start batch processing
From the workflow indicator at the top of the interface, you can see that the following stages are "Set Save Location" and "Start Processing." After entering the save settings, specify the save location for the processing results according to the options provided on the page, and then enter the final execution stage.
To make result checking easier, it is recommended to back up the original files before formal processing, or save the output files to a directory that is easy to distinguish. Once revisions are batch accepted or rejected, the document body will change substantially; especially when choosing to reject revisions, an incorrect processing direction may cause changes that should have been kept to be undone.
After completing the save settings, start the processing task and wait for the software to process the files in the list in sequence. After the task ends, open the output documents at the specified location and focus on checking whether revision marks have disappeared, whether the body text matches the expected accept or reject result, and whether the files open normally.
4. How to check the results after batch processing
Batch tasks can reduce repetitive work, but for important documents such as contracts, financial materials, and bids, spot checks are still recommended. You can confirm the results from the following aspects:
- Check text content: After accepting revisions, confirm that newly added content has been retained and deleted content has been removed; after rejecting revisions, check whether the original text has been restored as expected.
- Check revision display: Open the review-related area in Word to confirm that the marks have not simply been hidden, but that the revision records have actually been processed as required.
- Check the stop tracking state: If "Stop Tracking" was enabled in the task, you can type a small amount of test text in the document to observe whether it is still marked as a new revision. After testing, remember to undo the change and close the file.
- Check files in different formats: If the task includes both doc and docx files, it is recommended to spot-check at least one of each to confirm that both types of documents open and read normally.
- Check file integrity: Review whether headers and footers, tables, images, page breaks, and paragraph positions are normal, to avoid focusing only on revision colors while ignoring the overall layout.
5. Common questions and precautions
1. What is the difference between accepting revisions and hiding revision marks?
Hiding marks usually only changes the current display mode. The revision data may still remain in the Word document, and others can still see it after switching the display mode. Accepting revisions means confirming those changes and applying the results to the body text. When formal finalization or external distribution is required, you should clarify whether the task requires merely hiding the marks, or fully accepting or rejecting the revisions.
2. Can some files be accepted and some rejected in the same task?
The page shown in the screenshot sets one unified "Operation Type" for the current batch. To avoid confusion in the processing direction, it is recommended to group the files in advance: create one task for documents whose revisions should be accepted, and another task for documents whose revisions should be rejected. Processing in separate batches makes verification easier and reduces the risk of incorrect operations.
3. Does "Stop Tracking" delete existing revisions?
These two should not be treated as the same. Stop Tracking is mainly used to prevent subsequent editing from continuing to generate new revisions. Existing records should still be handled through "Accept All Revisions" or "Reject All Revisions." In actual tasks, you can combine these settings according to your finalization requirements.
4. Why must you back up before processing?
Batch accepting or rejecting revisions changes the body content in multiple files. If the processing direction is chosen incorrectly, the impact is not on a single file but on the entire task list. Keeping the original documents allows you to re-run the task if problems are found, and also makes it easier to compare differences before and after modification.
5. If the document also contains comments, what happens to comments after accepting revisions?
Revisions and comments are two different types of information. This tutorial corresponds to the "Accept or Reject Word Revisions" feature, and you should not assume that it also deletes comments at the same time. If the delivery standard also requires removing comments, you should check the document separately and use the corresponding comment-processing feature in the interface, to avoid confusing different tasks.
6. Can files be processed directly while they are open in Word?
To avoid file occupation, save conflicts, or failure to write results, you should save and close the relevant Word documents before running the batch task. Also confirm that the files are not read-only, and check that the save location is accessible normally.
7. How can you reduce the risk of very large batch processing?
When there are especially many files, you can first copy two or three representative documents for a small-scale test. After confirming that the "Accept" or "Reject" result, the stop tracking state, and the save location all meet expectations, import the complete folder. Testing before batch execution is more reliable than reworking files one by one after the fact.
6. Summary
Batch accepting or rejecting Word revisions is suitable for processing large numbers of doc and docx files with review marks. The overall workflow can be summarized as follows: open HeSoft Doc Batch Tool 's "Word Tools," select "Accept or Reject Word Revisions," add files or import a folder, set Accept All Revisions or Reject All Revisions, enable Stop Tracking if needed, then set the save location and start processing.
Compared with opening Word documents one by one, the batch method concentrates repetitive review operations into a single task. It not only saves time, but also allows the same batch of files to use consistent finalization rules. In actual use, it is recommended to back up the original files first and verify the processing direction with a small number of samples. After confirming that the results are correct, import the complete directory for batch execution, and you can more efficiently complete contract finalization, thesis cleanup, document archiving, and document delivery tasks.
Keyword:Batch accept Word revisions , batch reject Word revisions , Word batch processing , docx revision status , delete Word revision marks , stop tracking changes