How to batch extract specified lines from multiple TXT texts and merge them into one file


Translation:EnglishFrançaisDeutschEspañol日本語한국어,Update Time:2026-11-15 06:26:15
Content note: This article reflects the software version available when it was published. Interfaces and features may change with updates; please refer to the current software. If you find an error, please let us know.
Software featured in this articleHeSoft Doc Batch Tool
Free DownloadSoftware IntroductionUser Guide

When a folder contains a large number of TXT notepad documents, and the work only requires the first few lines, last few lines, odd lines, even lines, or other specified lines of each file, opening, copying, and aggregating them one by one can take a lot of time. This article describes how to use the batch text processing feature in office software to import multiple TXT files at once, set the range of lines to extract, and then merge the extracted results into a single independent text file. The entire process is suitable for scenarios such as log summary organization, data aggregation, data sampling, and report title collection, and can reduce repetitive operations and lower the risk of missed or incorrect selections.

A folder may contain dozens or even hundreds of Notepad files, but the content you actually need may be only the first few lines, the last few lines, or certain specified lines of each file. With the traditional approach, you would need to open each TXT file one by one, find the target content, and then copy it into the same document. This method is not only slow, but also prone to problems such as missed files, incorrect line selection, and disordered copying order.

This article addresses exactly this type of repetitive text organization need: using the office software HeSoft Doc Batch Tool , batch extract specified lines from multiple TXT text files, and merge all extracted results into a single standalone text file. The following example explains the complete operation by extracting the first 5 lines from each of 5 TXT files and then merging them into merge.txt.

1. Applicable Scenarios

Batch extraction and merging of specified text lines is suitable for processing plain text materials with similar structures and large amounts of content. As long as the target information appears in a certain regular position in each file, you can reduce repetitive operations through unified settings.

1. Batch summary of log file abstracts

Some system logs, run records, or inspection reports record the time, device name, task number, and execution result in the first few lines. In this case, you do not need to merge the complete logs; you only need to extract the first few lines of each TXT file to quickly create a summary file for centralized review.

2. Collect titles and descriptions from multiple source files

If a batch of Notepad documents places the title, author, source, or content introduction at the top of each file, you can batch extract the first few lines and merge them without copying them one by one. For file archiving, content review, and text list organization, this method is more efficient.

3. Extract results or conclusions at the end of text files

Some task records place the final result, statistical value, or ending status at the end of the file. By selecting the last few lines, you can centrally collect the conclusion sections from a large amount of text and output them into one TXT file.

4. Sample and organize regular text

The software interface provides processing ranges such as all lines, the first few lines, the last few lines, odd lines, even lines, and custom. For data saved line by line, you can choose the corresponding method according to the actual structure. For example, for data saved at intervals, consider extracting odd lines or even lines; when the target line numbers are not consecutive, you can set them according to the custom option provided in the interface.

5. Merge interview records, lists, and batch-generated TXT files

Scripts, business systems, or devices often generate TXT text in batches. If you only need the data at fixed positions, extracting the specified lines before merging is more conducive to later reading and use than directly concatenating all the text completely.

2. Preview of Results: Before and After Processing

Before processing: multiple TXT files saved separately

Before processing, the folder contains multiple Notepad text files such as big_bang.txt, black_holes.txt, dark_energy.txt, dark_matter.txt, and galaxies.txt. The target content is scattered across different files. If processed manually, you would need to open these files one by one and copy the corresponding lines.

image-Batch extract specified lines from TXT,merge multiple text files,batch process Notepad files,TXT merge tool,batch extract the first few lines of text

This example has a total of 5 TXT files, and the first 5 lines need to be extracted from each file. In actual use, the files to be processed may have different names. The key is to confirm that they are all text files whose contents need to be extracted this time, and that the position rules of the target lines are consistent.

After processing: specified lines summarized into a separate file

After the batch processing is completed, the software centrally merges the qualified lines from each source file and generates a separate merge.txt file. Users then only need to open this summary file to view the extracted results, without repeatedly switching between multiple Notepad documents.

image-Batch extract specified lines from TXT,merge multiple text files,batch process Notepad files,TXT merge tool,batch extract the first few lines of text

This method does not simply concatenate all the contents of each TXT file. Instead, it first extracts the required lines according to the settings, and then uniformly merges the extracted results. Therefore, when the source files are large and contain much irrelevant content, the output file will be more concise and easier to search, proofread, copy, or further process.

3. Operation Steps: Batch Extract Specified TXT Lines and Merge Them

Step 1: Enter the corresponding batch text processing function

Open HeSoft Doc Batch Tool . In the left function area, select "Text Tools", and then enter the "Merge & Split" category. In the function list, find and select "Extract lines from text files and merge them into one file".

image-Batch extract specified lines from TXT,merge multiple text files,batch process Notepad files,TXT merge tool,batch extract the first few lines of text

The purpose of this step is to enter the processing module specifically used for "extract by line and then merge". Note that it is not exactly the same as "merge text files into one file": ordinary text merging usually merges the complete contents of the source files, while this function can first limit the lines to be retained and then generate a summary file. Users who only need part of the content should choose the fourth function marked in the screenshot.

Step 2: Add the TXT files to be processed

After entering the function page, you will first be in the "Select records to process" stage. You can click "Add Files" at the top of the page to select one or more TXT files; if the files to be processed are centrally stored in the same folder, you can also use "Import Files from Folder" to reduce the operations of selecting them one by one.

image-Batch extract specified lines from TXT,merge multiple text files,batch process Notepad files,TXT merge tool,batch extract the first few lines of text

After the files are successfully imported, the list will display information such as sequence number, name, path, extension, creation time, and modification time. In this example, 5 records have been imported, and the extensions are all txt. At this point, it is recommended to first check the following:

  • Whether the number of files is consistent with the actual task, to avoid missing or duplicate additions;
  • Whether the names and paths are correct, to prevent mistakenly selecting files with the same name in other directories;
  • Whether the extension is the text format that the current function needs to process;
  • Whether the order in the list conforms to the reading order of the final merged content.

If a file that does not need to be processed appears in the list, you can remove it using the delete operation on the right side of the corresponding record; if the entire batch of files was selected incorrectly, you can also use "Clear" at the top of the page to add them again. The interface also provides "Filter" and "Sort" entries. When there are many files, you can use these entries to assist in checking and organizing the records. After confirming that the to-be-processed list is correct, click "Next" at the bottom.

Step 3: Set the line range to be extracted

After entering the "Set processing options" page, select the type of lines to be extracted this time under "Processing range". In the screenshot, you can see options such as all lines, the first few lines, the last few lines, odd lines, even lines, and custom.

image-Batch extract specified lines from TXT,merge multiple text files,batch process Notepad files,TXT merge tool,batch extract the first few lines of text

The goal of this example is to extract the first 5 lines of each TXT text, so select "The first few lines" and enter 5 in the "Range" input box below. This setting means that the software will read the first 5 lines of each text file in the list separately, and then centrally merge these results, rather than extracting only the first 5 lines from the combined contents of all files.

Different options can be used for different tasks:

  • All lines: retain all lines of each text file, suitable for complete merging of TXT files;
  • The first few lines: suitable for extracting titles, file headers, basic information, and log summaries;
  • The last few lines: suitable for collecting conclusions, statistical results, or ending statuses;
  • Odd lines or even lines: suitable for regular text in which content is arranged at fixed intervals;
  • Custom: suitable for cases where the target line positions have clear requirements that cannot be summarized by the first few lines or last few lines.

When filling in the range, you should consider the actual structure of the source files. For example, entering 5 means that each file will extract at most the first 5 lines according to the setting. If the positions of the target information in different files are inconsistent, it is recommended to first organize the file structure, or process them in multiple batches with separate settings, to avoid getting results that do not meet expectations after applying the same rule all at once.

Step 4: Set the save location of the output file

After completing the processing range settings, click "Next" to enter the "Set save location" stage of the workflow. At this stage, follow the prompts in the software interface to select the save directory for the result file, and confirm that the location of the output file is easy to find.

It is recommended not to directly overwrite files or mix them in a directory that is difficult to identify. You can create a new result folder, or save the output file to the current task directory. The output name should also be identifiable, for example, merge.txt, 文本前5行汇总.txt, or 日志摘要汇总.txt. The specific file name is subject to the actual settings on the save page.

The purpose of setting the save location is to clarify where the final merged file will be generated. For tasks with many files or tasks that require multiple tests, clear directory and file naming can prevent old results from being mistaken for the latest results.

Step 5: Start processing and check the merged results

After confirming the save location, enter the "Start processing" stage and execute the batch task according to the prompts on the page. Based on the import list and processing range, the software will read the target lines of each TXT file in turn and write the extracted text into a separate file.

After processing is complete, open the output directory and confirm whether the expected merged file has been generated. In this example, the final result is merge.txt. It is recommended to open the result with Notepad or another text editor, and focus on checking whether the contents corresponding to the number of files are complete, whether the number of extracted lines from each source file meets expectations, and whether the merge order meets the usage requirements.

4. Common Problems and Precautions During Operation

1. Why cannot the complete text merge function be used directly

If you need to retain all contents of each file, you can use a complete merge function; but if you only want the first few lines, the last few lines, or specific lines, complete merging will write a large amount of irrelevant content into the result. In this case, you should use "Extract lines from text files and merge them into one file" to avoid having to manually delete content again after merging.

2. What is the relationship between merge order and the file list

Batch merge tasks usually require attention to the order of the import list, because it will affect the reading logic of the result content. Before executing the process, you should check the list according to name, number, or business order. The screenshot interface provides a sorting entry, which can assist in organization when needed, but the final result should still be based on the record order and processing results actually displayed on the page.

3. What to do if some files have fewer than the specified number of lines

If you set the extraction to the first 5 lines, but an individual TXT file itself has fewer than 5 lines, then the nonexistent lines of that file naturally have no content to extract. To avoid misjudging this as a processing failure, it is recommended to spot-check shorter texts in advance and verify the output results after completion.

4. Why garbled text may appear after merging

TXT files may use different character encodings. If some texts are generated by different systems, editors, or devices, inconsistent encoding may affect normal display. Before batch processing, you can open several sample files separately to confirm whether the Chinese text displays normally; if the source files themselves are already garbled, you should first unify or correct the text encoding before extracting specified lines and merging.

5. Will blank lines occupy line counts

Blank lines in text are usually also part of the text structure. If the file begins with blank lines, setting the extraction to the first 5 lines may cause the blank lines to affect the actual amount of valid content obtained. Therefore, before batch execution, you should first open a representative file to confirm exactly which line the title or target content is on.

6. Will the original TXT files be modified

The goal of this workflow is to read specified lines from source files and generate a new merged file. To further ensure data safety, it is still recommended to keep backups of the source files and save the results to a separate directory. Especially when processing business logs, experimental data, or the only version of text materials, do not delete the original files before verifying the results.

7. How to reduce the probability of errors when there are many files

You can first select 3 to 5 representative files for a small batch test. After confirming that the line range, file order, and output results are correct, import all TXT files for formal processing. If the structures of different files differ significantly, they should be processed in groups according to structure instead of forcibly using the same set of extraction conditions.

5. Efficiency Gains from Batch Processing

Manually extracting fixed lines from multiple Notepad documents may seem simple, but as the number of files increases, opening files, locating line numbers, copying content, switching windows, and saving results will take up a large amount of time. More importantly, repetitive mechanical operations can easily cause omissions and misalignment.

With HeSoft Doc Batch Tool , these repetitive steps can be converted into a unified workflow: import multiple TXT files at once, set the extraction range centrally, select the save location uniformly, and finally generate a separate merged file. The rules only need to be set once and can then be applied to the entire batch of texts, which is more suitable for office scenarios that frequently process logs, reports, lists, data fragments, and batch-generated text.

6. Summary

To batch extract certain lines from many Notepad files and merge them into one file, the core process can be summarized as follows: enter the Merge & Split category under Text Tools, select "Extract lines from text files and merge them into one file", add TXT files in batches, set the first few lines, last few lines, odd/even lines, or custom range, then set the save location and start processing.

If you are still opening TXT files one by one to copy content, it is recommended to first test this workflow with a small number of samples. After confirming that the extraction range and merge order are correct, process the complete folder. Completing batch extraction and merging through office software can not only shorten operation time, but also reduce missed selections, incorrect selections, and disordered order caused by repetitive labor, making text summarization work more stable, clear, and efficient.


Keyword:Batch extract specified lines from TXT , merge multiple text files , batch process Notepad files , TXT merge tool , batch extract the first few lines of text
Creation Time:2026-11-15 06:26:00
Software featured in this articleHeSoft Doc Batch Tool
Free DownloadSoftware IntroductionUser Guide
Content note: This article reflects the software version available when it was published. Interfaces and features may change with updates; please refer to the current software. If you find an error, please let us know.