How to split TXT files in batches? Split multiple Notepad files into smaller files by line count or file quantity


Translation:EnglishFrançaisDeutschEspañol日本語한국어
Update Time:2026-11-19 06:25:42
Content note: This article reflects the software version available when it was published. Interfaces and features may change with updates; please refer to the current software. If you find an error, please let us know.
Software featured in this articleHeSoft Doc Batch Tool
Free DownloadSoftware IntroductionUser Guide

When multiple TXT Notepad files have long content and need to be split into several smaller files individually, copying, pasting, and saving them one by one is not only time-consuming but also prone to omitting content or mixing up file ownership. This article explains how to use the batch text file splitting feature in office software to import multiple txt files at once and split them by the maximum number of lines per file, the average number of files, or a custom range. Taking the example of splitting 5 source files evenly into 5 parts each, it fully describes the feature entry point, file import, rule settings, save location, and result verification methods, helping users reduce repetitive operations.

When organizing logs, program-exported data, novel chapters, corpora, meeting notes, or text materials generated by business systems, you often encounter this situation: there are many TXT Notepad files in a folder, and each file is relatively long, requiring them to be split into multiple smaller, more manageable text files. If you manually open files with Notepad, then repeatedly select content, copy, create new files, and save them, not only are there many operations, but problems such as missing lines, duplicate pasting, and confusing file names may also occur.

This article addresses the problem of batch-splitting many TXT files into multiple smaller files. The operation uses HeSoft Doc Batch Tool , which is an office software designed for batch file processing scenarios. It can add multiple txt text files at once, uniformly set the splitting method for all files, and then generate results in batches according to the workflow. The following will combine actual screenshots and use the example of "splitting 5 TXT files evenly into 5 smaller files each" to explain the complete method.

1. Which scenarios are suitable for batch-splitting TXT files

TXT is a common plain text file format, usually with the extension .txt, and can be opened by Windows Notepad and other text editors. Although the format is simple, when there are many files and long content, the workload of manual splitting quickly increases. Batch-splitting text files is especially suitable for the following scenarios:

  • Log file segmentation: Split long runtime logs, server logs, or inspection records into multiple smaller files for easier sending, troubleshooting, and archiving.
  • Data text splitting: Cut txt data exported by a system by line count, making it convenient to import into other systems in batches or hand off to different personnel.
  • Corpus and manuscript organization: Evenly divide long texts such as novels, scripts, subtitle source text, and training corpora into a specified number of files.
  • Material distribution: When a large Notepad document is inconvenient to transfer directly, it can be split into several smaller parts and then uploaded or sent in batches.
  • Batch processing of similar files: When dozens or even more TXT files exist in a directory and need to be split one by one using the same rule, without repeating the same operation.

Compared with methods that handle only a single file, the batch processing function of office software is more suitable for standardized tasks. Users only need to import source files in one place and set the rule once, and then multiple text files can be split in the same way, reducing repetitive work.

2. Preview of the effect before batch-splitting TXT files

Before processing, there are 5 TXT Notepad files in the sample folder, named big_bang.txt, black_holes.txt, dark_energy.txt, dark_matter.txt, and galaxies.txt. Each file is currently an independent complete text and has not yet been split.

image-Batch split TXT files,split TXT files,split notepad into multiple files,split text by number of lines,batch process text files

In actual use, the source files do not have to use the English names in the example, as long as they are txt text files that need to be processed. Before starting, it is recommended to first confirm that the files can be opened normally, and back up the original files according to work needs. That way, even if you later need to change the number of split files or reset rules, you can continue to use the original files for processing again.

3. Preview of the effect after splitting TXT files

After batch processing is completed, the 5 source TXT files each generate corresponding result folders. The folder names reuse the main name of the source files. For example, big_bang.txt corresponds to the big_bang folder, and black_holes.txt corresponds to the black_holes folder. This makes it visually clear which original text each group of smaller files comes from, avoiding the mixing of split results from different files.

After opening one of the result folders, you can see 1.txt, 2.txt, 3.txt, 4.txt, and 5.txt, a total of 5 split smaller files. This is consistent with the "split evenly into 5 files" setting used during the operation.

image-Batch split TXT files,split TXT files,split notepad into multiple files,split text by number of lines,batch process text files

This method of creating separate result directories for each source file is especially suitable for processing multiple Notepad files at the same time. After processing is complete, users can continue to review, send, archive, or perform subsequent data processing on the smaller files without manually distinguishing which source file they came from.

4. Steps for batch-splitting multiple TXT Notepad files into smaller files

Step 1: Enter the "Split text file into multiple files" function

After opening HeSoft Doc Batch Tool , select "Text Tools" in the function area on the left. After entering the Text Tools page, switch to the "Merge and Split" category, find and click "Split text file into multiple files" in the function list.

image-Batch split TXT files,split TXT files,split notepad into multiple files,split text by number of lines,batch process text files

From the interface description, it can be seen that this function is used to batch-split text files into multiple files by line count or number of files. It should be noted that other functions such as text merging also exist in the same area. If the current goal is to turn one TXT into multiple smaller TXT files, you should select "Split text file into multiple files" and avoid mistakenly selecting "Merge text files into one file."

After entering the function, the software guides users in the order of "Select the records to process - Set processing options - Set save location - Start processing." Following this workflow step by step can reduce the chance of omitting necessary parameters.

Step 2: Import all TXT files to be split at once

After entering the task page, first add the files to be processed. The upper right area of the interface provides two entry points: "Add Files" and "Import Files from Folder." If you only need to select a small number of scattered TXT files, you can use "Add Files"; if multiple text files are all stored in the same directory, using "Import Files from Folder" is usually more convenient.

image-Batch split TXT files,split TXT files,split notepad into multiple files,split text by number of lines,batch process text files

In the example, big_bang.txt, black_holes.txt, dark_energy.txt, dark_matter.txt, and galaxies.txt were imported at once, a total of 5 records. The list displays information such as name, path, extension, creation time, and modification time. Before formally proceeding to the next step, it is recommended to check the following key points:

  1. Whether the number of files in the list matches the planned number;
  2. Whether the extension is txt, to avoid including irrelevant files;
  3. Whether the file paths are correct, especially whether a file with the same name was selected by mistake;
  4. Whether there are records that do not need to be processed, and if so, remove them from the list through the corresponding operation.

After confirming that everything is correct, click "Next" at the bottom of the page to enter the splitting rule settings. The key value of batch processing is right here: multiple TXT files only need to be imported once, and the same set of splitting settings can be applied uniformly later, without opening and configuring each one repeatedly.

Step 3: Choose the text splitting method according to actual needs

On the "Set Processing Options" page, the interface provides 3 splitting methods: Maximum number of lines per text file, split evenly into several files, and custom range splitting. You should choose an appropriate rule according to the subsequent purpose.

image-Batch split TXT files,split TXT files,split notepad into multiple files,split text by number of lines,batch process text files

Method 1: Maximum number of lines per text file

This method is suitable when there is a clear upper limit on the number of lines in each output file. For example, if a downstream system stipulates that only a certain number of lines can be imported at a time, you can split according to the maximum line count. The total number of lines in the source file is not necessarily an exact multiple of the set value, so the last smaller file may have fewer lines than the previous files, which is normal when splitting by a fixed line count.

Method 2: Split evenly into several files

This method is suitable for scenarios where you already know how many files need to be generated, but do not require each file to contain a strict fixed number of lines. The example selects "Split evenly into several files" and enters 5 below. Therefore, each imported source TXT will be evenly split into 5 smaller TXT files.

The number here applies to each source file, rather than splitting all files in the list into 5 parts in total. In the example there are 5 source files, and each source file generates 5 result files, so the corresponding content should be viewed in each respective result folder.

Method 3: Custom range splitting

When users need to split according to specified content ranges, rather than simply by fixed line count or average quantity, they can choose "Custom range splitting." Since different tasks require different ranges, after selecting this method, fill in the settings according to the items displayed on the interface, and carefully check before processing whether the ranges are continuous and whether there are omissions.

The goal of this example is to make each TXT generate 5 parts on average, so keep "Split evenly into several files" selected, enter 5 in the value box, and then click "Next." If your actual need is that each part contains at most a certain number of lines, you should switch to the first method instead of copying the example parameters.

Step 4: Set the save location for the split results

After completing the processing options, the workflow proceeds to "Set Save Location." Here you should select a folder with sufficient space and easy lookup to store the smaller TXT files generated after splitting. To facilitate comparison and prevent misoperation, it is recommended not to mix the result directory with the source file directory. You can create a clearly named new folder, such as "TXT Split Results" or "Split Text."

When selecting the save location, also confirm that the directory has normal write permission. If the output directory is located on removable storage, a shared directory, or a permission-restricted location, first confirm that the device connection is stable and the folder can be written to. When there are many files in the batch, sufficient storage space should also be reserved.

Step 5: Start batch processing and wait for the task to complete

After confirming the save directory, enter the "Start Processing" stage. Before execution, you can check once more the number of files, splitting method, splitting parameters, and save location, and then start the task after confirming that everything is correct. The software will process the imported TXT files in sequence according to the unified rule.

During processing, it is not recommended to move, delete, or rename the source files, and do not disconnect the disk containing the source files or output directory. After the task finishes, open the configured save location to view the results. In the sample results, each source file has a corresponding folder, and the folder contains split files from 1.txt to 5.txt.

Step 6: Spot-check whether the split results meet expectations

Completing batch processing does not mean the check can be omitted. It is recommended to select at least one or two result folders for spot-checking: first verify whether the number of smaller files matches the setting, then open the first, one in the middle, and the last TXT in turn, and observe whether the content continuity meets expectations. At the same time, keep the original files, and after confirming that the split results can be used normally, decide whether to move or archive the source files.

5. What to pay attention to when choosing splitting rules

1. "By maximum line count" and "average split quantity" solve different problems. If a downstream platform limits the number of lines in a single file, you should prefer "Maximum number of lines per text file"; if the task requires distributing each set of materials to a fixed number of people, or clearly requires generating a fixed number of copies, you can choose "Split evenly into several files."

2. The split quantity should match the scale of the text content. When the source file content is relatively small, it is not advisable to set an excessively large split quantity. Before setting, you can first understand the approximate number of lines in the text to avoid results that are too fragmented.

3. Multiple source files will each execute the same rule. Batch-importing 5 TXT files and setting an even split into 5 files means each TXT is split into 5 parts separately, rather than mixing all content together and then splitting it. This is especially important when estimating the number of output files.

4. Test parameters with a small number of files first. If you need to process a large number of logs or data texts, you can first import one or two representative files for testing. After confirming that the splitting method, quantity, and result directory meet requirements, process all files in batches, which helps reduce rework costs.

5. Original TXT files should be backed up in advance. Although the sample results are saved in a separate directory, it is still recommended to back up important materials before processing. Backups can preserve the original basis for parameter adjustment, content review, and re-splitting.

6. Frequently asked questions

1. Can multiple TXT files be split at once?

Yes. The task page supports selecting multiple files through "Add Files" and also supports "Import Files from Folder." After importing, you can check them uniformly in the list and then batch-split them using the same rule.

2. How can each TXT be fixed to split into 5 parts?

In "Splitting method," select "Split evenly into several files," then set the quantity to 5. After processing, each source TXT will generate 5 smaller files separately.

3. If I want each smaller file not to exceed a specified number of lines, how should I set it?

Select "Maximum number of lines per text file," then set the line count according to actual needs. It is more suitable for import, review, or distribution scenarios with a per-file line limit.

4. Why do multiple result folders with the same name appear after processing?

From the sample effect, the software organizes corresponding results according to the main name of the source file. For example, the split content of big_bang.txt is placed in the big_bang folder. This isolates the smaller files generated by different source TXT files and makes it easier to trace their origin.

5. Why do the output files appear as 1.txt, 2.txt, 3.txt?

The numbering reflects the order of the split files. When viewing the content or performing subsequent processing, it is recommended to keep the numbering and not arbitrarily disrupt the order. If renaming is truly necessary, first confirm the sequential relationship between the contents.

6. What should be checked as a priority after batch splitting is complete?

It is recommended to check the number of result folders, the number of smaller files in each folder, whether the beginning and ending content is complete, whether the save location is correct, and whether the generated TXT files can be opened normally. For important data, you can also spot-check and compare the split content in order with the source files.

7. Summary

The core workflow for batch-splitting many TXT Notepad files into multiple smaller files can be summarized as follows: enter HeSoft Doc Batch Tool "Text Tools," select "Split text file into multiple files," import all txt source files at once, set splitting by maximum line count, average number of files, or custom range, then select the save location and start processing.

Compared with opening Notepad files one by one and manually copying and saving, using office software for batch processing can centrally complete the repetitive file import, rule configuration, and result generation. Especially when there are many files to process, unified rules not only save operation time, but also help maintain consistency in result directories and file counts.

If you are preparing to split logs, data texts, corpora, or other long TXT files, you can first select a small number of samples and set appropriate splitting rules according to the steps in this article; after confirming that the test results meet requirements, import all files and execute batch processing. This can improve efficiency while also making it easier to check and manage the final generated smaller files.

Keyword:Batch split TXT files , split TXT files , split notepad into multiple files , split text by number of lines , batch process text files
Creation Time:2026-11-19 06:25:26
Software featured in this articleHeSoft Doc Batch Tool
Free DownloadSoftware IntroductionUser Guide
Content note: This article reflects the software version available when it was published. Interfaces and features may change with updates; please refer to the current software. If you find an error, please let us know.